Cooper Lighting T6 G12 Fascicule

www.cooperlighting.com

Thermal
Protector

9.45”

13.01”

17.14”

16.01”

13.01”

45º x 45º

Adjust

Double 
Gimbal

6.69”

6.69”

Integral Electronic

Metal Halide Ballast

Housing, junction box & trimless 

meshplate assembly are all steel 

construction.  Perforated meshplate allows 

for trimless installation in drywall/plaster 

ceilings by allowing the ceiling’s mudding 

compound to be applied right up to the 

edge of the fixture opening.  Includes 

a beveled “knife-edge” lips to ensure a 

clean edge. Can accommodate 0.50” to 

1.25” ceiling thickness. Optional Chicago 

Plenum configuration available.

Thermal protection provided to guard 

against overheating and misuse of 

insulation over and around fixture. Vent 

holes in housing provide cooler operation.

Junction Box is UL listed for through 

branch wiring, 6 #12 90º C supply 

conductors or 60º C for end of run. The 

fixture is also UL listed as ‘access above 

ceiling not required’. 

Electrical accessible through ceiling 

opening. J-Box located on the side wall 

of the housing behind removable access 

doors. Integral electronic metal halide 

ballasts on individually removable “trays” 

for easy maintenance. May also be con-

figured for remote power.

One (1) T6 G12 Metal Halide lamp with 

reflector mounted in adjustable double 

gimbal. Lamp holder is individually remov-

able and may be regressed 1” for additional 

cut-off. Lamp can accept up to three opti-

cal accessories (i.e. lens + hex louver + 

snoot). 45º x 45º locking lamp adjustment.  

Beveled-edge lamp ring is secured with 

threadless, bayonet action. Optional 

retractable arm is available for lamp 

pulldown and extreme aiming. Includes 

G12 socket.

Butterfly Brackets accept 1/2” EMT, 

C Channel, Tbar fasteners, and bar 

hangers.  Four tabs on housing for 

securing to structure. Perforated flaps 

along housing sides for securing trimless 

insert to fixture and drywall.

cULus listed for non-type IC 

applications, suitable for use in damp 

locations.

 

 Ceiling Cut-Out: 7.49” x 7.49”

An adjustable Single-lamp Recessed fixture for trimless installation suitable for 
downlighting and accent applications. Utilizes ONE (1) T6 G12 Metal Halide 
lamp.

For new construction applications. Insulation must be kept 3” from all sides 
and at least 1” above the housing.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031

 

rev 050108

  COMBOLIGHT Recessed 

One (1) Light

  New Construction 

  Chicago Plenum

 70 Watt T6 G12 Metal Halide / Narrow

 70 Watt T6 G12 Metal Halide / Medium

 70 Watt T6 G12 Metal Halide / Wide

   Electronic Metal Halide 

Ballast

 120V

 277V 

  Double Gimbal 

  Retractable Double Gimbal

  White 

 Black 

 Industrial Silver

  Trimless

  White 

 Black 

 Industrial Silver

This fixture utilizes T6 Metal Halide lamp and includes high-

performance clear aluminum reflectors in narrow, medium, 

or wide distributions. Non-standard color reflectors are 

available upon request.