Cooper Lighting ADH080901 Manuel D’Utilisation
Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
05/14/2008 2:39:10 PM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
ADH080901
DIMENSIONS
DRILLING PATTERNS
DESCRIPTION
The Lumark Tribute Pole/Fixture Combo features all you need for easy
selection and installation for poles and fixtures. Including the quality,
die-cast Triubte area luminaire and 8" arm complete with lamp, square
straight steel pole and necessary anchorage. Available in single or dual
fixture combinations.
selection and installation for poles and fixtures. Including the quality,
die-cast Triubte area luminaire and 8" arm complete with lamp, square
straight steel pole and necessary anchorage. Available in single or dual
fixture combinations.
The Tribute/Pole Combo is ideal for parking areas, access roadways and
other general off street area/site lighting applications.
other general off street area/site lighting applications.
Construction
Rugged one-piece die-cast alumi-
num housing and door frame
finished in dark bronze polyester
powder paint. One-piece silicone
gasket protects the optical
chamber from performance
degrading contaminants. One (1)
stainless spring latch and two (2)
stainless steel hinges allow
toolless opening and removal of
door frame. U.L. Listed and CSA
certified for wet locations. IP55
Rated.
Rugged one-piece die-cast alumi-
num housing and door frame
finished in dark bronze polyester
powder paint. One-piece silicone
gasket protects the optical
chamber from performance
degrading contaminants. One (1)
stainless spring latch and two (2)
stainless steel hinges allow
toolless opening and removal of
door frame. U.L. Listed and CSA
certified for wet locations. IP55
Rated.
Reflector
Hydroformed anodized aluminum
reflector offered in an adjustable
Type II/III or a Type IV distribution.
Optical modules are field rotatable
in 90° increments and offered
standard with mogul-base
lampholders.
Hydroformed anodized aluminum
reflector offered in an adjustable
Type II/III or a Type IV distribution.
Optical modules are field rotatable
in 90° increments and offered
standard with mogul-base
lampholders.
Electrical
Ballast and related electrical
componentry are hard mounted to
die-cast housing for optimal heat
transfer and operating efficiency.
Ballast and related electrical
componentry are hard mounted to
die-cast housing for optimal heat
transfer and operating efficiency.
Mounting
Extruded 8" aluminum arm
features internal bolt guides for
easy positioning of fixture during
installation to pole.
Extruded 8" aluminum arm
features internal bolt guides for
easy positioning of fixture during
installation to pole.
Finish
Housing and arm finished in a
5 stage premium TGIC bronze
polyester powder coat paint.
Housing and arm finished in a
5 stage premium TGIC bronze
polyester powder coat paint.
Pole
Shaft is one piece construction
ASTM A500 grade "B" steel, shot
blasted and finished in dark bronze
polyester powder coat. Anchor
base is fabricated from ASTM
grade steel. ASTM A366 steel full
base cover is provided to enclose
base plate and anchor bolts.
Anchor bolts are per ASTM A576
with (2) nuts, (2) flat washers, and
(1) lock washer. Hardware and
threaded portion of bolt are hot dip
galvanized. 3" hook for 3/4" bolt. 4"
hook for 1" bolt.
Shaft is one piece construction
ASTM A500 grade "B" steel, shot
blasted and finished in dark bronze
polyester powder coat. Anchor
base is fabricated from ASTM
grade steel. ASTM A366 steel full
base cover is provided to enclose
base plate and anchor bolts.
Anchor bolts are per ASTM A576
with (2) nuts, (2) flat washers, and
(1) lock washer. Hardware and
threaded portion of bolt are hot dip
galvanized. 3" hook for 3/4" bolt. 4"
hook for 1" bolt.
PFT
TRIBUTE AND
POLE COMBO
150 - 400 W
High Pressure Sodium
Pulse Start Metal Halide
Metal Halide
15 ' - 30 '
Square Straight
Steel Pole
POLE AND FIXTURE
COMBO
6 1/2"
[165mm]
8" [203mm]
15 1/2" [394mm]
22" [559mm]
C O M P L I A N T
Full Cutoff
D A R K S K Y
FCO
E N E R G Y D ATA
Hi-Reactance Ballast Input Watts
150W HPS HPF (190 Watts)
150W MH HPF (185 Watts)
150W HPS HPF (190 Watts)
150W MH HPF (185 Watts)
CWI Ballast Input Watts
250W HPS HPF (300 Watts)
250W HPS HPF (300 Watts)
CWA Ballast Input Watts
175W MH HPF (210 Watts)
175W MP HPF (208 Watts)
250W MP HPF (291 Watts)
250W MH HPF (295 Watts)
400W MP HPF (452 Watts)
400W MH HPF (455 Watts)
400W HPS HPF (465 Watts)
250W MH HPF (295 Watts)
400W MP HPF (452 Watts)
400W MH HPF (455 Watts)
400W HPS HPF (465 Watts)
E PA
Effective Projected Area: (Sq. Ft.)
Single: 1.62
Dual: 3.24
Single: 1.62
Dual: 3.24
S H I P P I N G D ATA
Approximate Net Weight:
39 lbs. (17.73 kgs.)
39 lbs. (17.73 kgs.)
S
YS
T EM
S
C
E R TIFIED
E
G
A
T
T
A
W
E
P
Y
T
P
M
A
L
Pulse Start Metal Halide
Pulse Start Metal Halide
175, 250, 400W
Metal Halide
175, 250, 400W
High Pressure Sodium
150, 250, 400W
T Y P E “ M ”
3/4" [20mm]
dia. hole
dia. hole
(2) 5/8" [16mm]
dia. holes
dia. holes
4 7/8" [124mm]
2 7/16" [124mm]
2 5/16"
[59mm]
COOPER LIGHTING - LUMARK
®