RSA Lighting Indoor Furnishings Fascicule

www.cooperlighting.com

Thermal
Protector

Wiring

Compartment

4.65”

27.87”

28.70”

40.46”

30.67”

7.95”

9.27”

10.96”

4.65”

7.45” 

Required 

above 

ceiling

45º x 45º

Adjust

Double 
Gimbal

Housing and junction box are aluminum,  

trimless meshplate is steel with powder 

coated finish.  Perforated meshplate 

allows for trimless installation in drywall/

plaster ceilings by allowing the ceiling’s 

mudding compound to be applied right 

up to the edge of the fixture opening.  

Includes a beveled “knife-edge” lips to 

ensure a clean edge. Can accommodate 

various ceiling thickness. 

Thermal protection provided to guard 

against overheating and misuse of 

insulation over and around fixture. Vent 

holes in housing provide cooler operation.

Junction Box is UL listed for through 

branch wiring, 6 #12 90º C supply con-

ductors or 60º C for end of run. The fixture 

is also UL listed as ‘access above ceiling 

not required’.

Electrical accessible through ceiling 

opening. J-Box located on the side 

wall of the housing behind removable 

access doors. Electrical components on 

individually removable “trays” for easy 

maintenance. 

Six (6) PAR20 120V lamps mounted in 

adjustable double gimbal. Lamp holders 

are  removable and may be regressed 1” 

for additional cut-off. Lamps can accept 

up to three optical accessories (i.e. lens 

+ hex louver + snoot). 45º x 45º locking 

lamp adjustment.  Beveled-edge lamp 

ring is secured with threadless, bayonet 

action. Optional retractable arm is avail-

able for lamp pulldown and extreme aim-

ing. Includes Med. Base sockets.

A mounting frame is provided which 

inserts into the ceiling opening. The 

housing is then pushed through the 

mounting frame and secured with 

screws through the meshplate.

cULus listed for non-type IC 

applications, suitable for use in damp 

locations.

 

Ceiling Cut-Out: 5.90” x 28.96”

An adjustable Multi-lamp Recessed fixture for trimless installation suitable for 
downlighting and accent applications. Utilizes SIX (6) PAR20 120V lamps.

For remodel applications. Insulation must be kept 3” from all sides and at least 
1” above the housing.

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031

 

rev 022408

For use with 20W or 39W PAR20 120V lamps.

  COMBOLIGHT 

Recessed Six (6) Light

  Remodel

  50 Watt max. PAR20 120V 

  None - Line Voltage Lamp

 120V

 

  Double Gimbal 

  Retractable Double Gimbal

  Trimless

  Trimless

  White 

 Black 

 Industrial Silver