Honeywell 5820XL Manuel D’Utilisation
Programming
151209
7-37
7.7.3.2 System Alarm Cadence
Fire drill and system auxiliary alarm events can have special cadence patterns to distinguish
them from other types of alarms. See Section 7.4.1.4 for available cadence patterns.
them from other types of alarms. See Section 7.4.1.4 for available cadence patterns.
A typical use of the System Aux1 and Aux2 patterns is to distinguish fire emergencies from
other types of emergencies. The System Aux1 and Aux2 alarms would be triggered by a
system-wide switch.
other types of emergencies. The System Aux1 and Aux2 alarms would be triggered by a
system-wide switch.
To access the screen for selecting output groups and cadence patterns for system trouble
events:
events:
1. Enter the installer code.
2. Press
or
to display the main menu.
3. Select
for Program Menu.
Display reads:
Initializing
Please wait . . .
4. From the Program Menu, select
for System Options.
5. From the System Options Menu, select
for Sys. Event Outputs.
6. Press
for System Alarm Cadence.
A screen similar to the one in Figure 7-15 will display. Select a cadence pattern for these
special events if required for your application.
special events if required for your application.
Figure 7-15 Special Cadence Patterns for Fire Drill and Auxiliary Alarm Events
7
5
2
2