Ei Electronics Ei 100TYC Fascicule
E & OE As our policy is one of continuous product development, we reserve the right to alter product details without prior n otice
.
Ei100TYC DataSht RevB
Shannon Free Zone, Shannon, Co. Clare, Ireland.
Ph.
+353 61 471277
Fx.
+353 61 471053
Email.
eielectronics@eiltd.ie
Web:
www.eielectronics.com
Model
Ei 100TYC Ionisation
High sensitivity
– responds to all standard fires
Dual Ionization chamber - quick response fast
flaming fires
flaming fires
Lithium 10 year battery to provide long lasting life
No changing of battery required
Interconnect up to 12 other alarms
Needs no wiring
Built in sounder
Test and hush button
Kitemarked to BS EN 14604:2005
5 year guarantee
Product Description
The Ei100TYC is an Ionisation Smoke Alarm that runs
on a 9V lithium 10 year battery (supplied with the alarm).
Ionisation smoke alarms operate on the principle that
electrical current flowing between electrodes in an
ionization chamber is reduced when smoke particles
enter.
Ionisation technology gives a rapid response to fast
flaming fires
The Ei100TYC is easily installed and comes supplied
with all necessary screw fixings.
The interconnect feature allows the alarm to be
connected with up to 12 other similar alarms.
on a 9V lithium 10 year battery (supplied with the alarm).
Ionisation smoke alarms operate on the principle that
electrical current flowing between electrodes in an
ionization chamber is reduced when smoke particles
enter.
Ionisation technology gives a rapid response to fast
flaming fires
The Ei100TYC is easily installed and comes supplied
with all necessary screw fixings.
The interconnect feature allows the alarm to be
connected with up to 12 other similar alarms.
Operation
The smoke detector will activate the built in sounder
upon sensing smoke particles
upon sensing smoke particles
The smoke detector will automatically reset itself
and silence the sounder when smoke particles are
no longer present in the sensing chamber
and silence the sounder when smoke particles are
no longer present in the sensing chamber
The built in sounder will provide a minimum sound
output of 85dB at 3m
output of 85dB at 3m
The “Hush/Test” button will perform a self test and
sound the horn (it may take up to 10 seconds)
sound the horn (it may take up to 10 seconds)
The “Hush/Test” button will silence nuisance alarms
Interconnect up to 12 other alarms (9V ionisation,
optical or heat) when one senses smoke, all alarm.
Helps ensure warning will be heard throughout the
house
optical or heat) when one senses smoke, all alarm.
Helps ensure warning will be heard throughout the
house
The smoke detector will emit a beep every 40
seconds to indicate that the battery back up is
depleted and that the alarm should be removed and
replaced with a new one (the batteries are not
replaceable in the Ei100TYC)
seconds to indicate that the battery back up is
depleted and that the alarm should be removed and
replaced with a new one (the batteries are not
replaceable in the Ei100TYC)
Lithium 10 year battery