Manualsbrain.com
  1. Manuels
  2. Marques
  3. Samsung
  4. HT-P11
  5. Manuel D’Utilisation

Samsung HT-P11 Manuel D’Utilisation

Télécharger
Page de 30
GB
16
15
CONNECTIONS
Press 
AUX
on the remote control to select AUX.
•
You can also use the 
FUNCTION
button on the main unit.
The mode switches as follows: 
DVD/CD
➝ 
AUX ➝ FM➝ AM
.
Connect Audio In on the DVD player to Audio Out on the external analog component.
•
Be sure to match connector colors.
1
2
Example: Analog signal components such as a VCR or TV.
Connecting an External Analog Component
Audio Cable
(not supplied)
If the external analog
component has only one
Audio Out, connect either 
left or right.
The cooling fan supplies cool air to the unit to  prevent overheating.
Please observe the following cautions for your safety.
•
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
•
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
Cooling Fan
Connecting External Component
Connecting the FM Antenna
FM antenna connection
AM antenna connection
1. Connect the FM antenna supplied to the 
FM 75Ω COAXIAL terminal.
2. Slowly move the antenna wire around until
you find a location where reception is good,
then fasten it to a wall or other rigid surface.
1. Connect the AM loop antenna supplied
to the AM and       terminals.
•
Insert the black wire into the black terminal and the
white wire into the white terminal.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM 
terminal. (Keep the AM loop antenna
connected).
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
FM Antenna (supplied)
AM Loop Antenna 
(supplied)
If AM reception is poor, connect an
outdoor AM antenna(not supplied).