Sony HT-7100DH Manuel D’Utilisation
69
US
D:\CANNES\SONY_HA\JOB 2007\IM\HT-7100DH\US_HT-7100DH_data\US06OTH_HT-7100DH-
U.fm
U.fm
masterpage: Right
HT-7100DH
3-093-550-11 (1)
Other Oper
ations
Recording using the
receiver
receiver
You can record onto a CD-R using the
receiver. See the operating instructions
supplied with your CD.
receiver. See the operating instructions
supplied with your CD.
1
Press one of the input buttons
to select the playback
component.
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
the receiver.
2
Prepare the playback
component for playing.
component for playing.
For example, tune the radio station you
want to record.
want to record.
3
Prepare the recording
component.
component.
Insert a CD-R into the CD recorder and
adjust the recording level.
adjust the recording level.
4
Start recording on the
recording component, then
start playback on the playback
component.
recording component, then
start playback on the playback
component.
Note
Sound adjustments do not affect the signal output
from the SA-CD/CD/CD-R OUT jacks.
from the SA-CD/CD/CD-R OUT jacks.
You can record from an video component
using the receiver. See the operating
instructions supplied with your recording
component.
using the receiver. See the operating
instructions supplied with your recording
component.
1
Press one of the input buttons
to select the playback
component.
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
the receiver.
2
Prepare the playback
component for playing.
component for playing.
For example, insert the video tape you
want to copy into the VCR.
want to copy into the VCR.
3
Prepare the recording
component.
component.
Insert a blank video tape, etc. into the
recording component (VIDEO 1) for
recording.
recording component (VIDEO 1) for
recording.
4
Start recording on the
recording component, then
start playback on the playback
component.
recording component, then
start playback on the playback
component.
Notes
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the source.
record from the source.
• When DMPORT input is selected and you have
assigned VIDEO 1 input to DMPORT input, no
video signals are output from the VIDEO 1 VIDEO
OUT jack.
video signals are output from the VIDEO 1 VIDEO
OUT jack.
Recording onto a CD-R
Recording onto a recording
media
media