HP (Hewlett-Packard) 2307890A Manuel D’Utilisation

Page de 194
Connecting Video Out
65
Connecting V
ideo Out
Video Out from AV Receiver to TV
Switching: Switch audio and video through your AV 
receiver if your AV receiver switches video and has the 
correct connections. This method gives you the best audio 
quality, and you can easily switch audio/video inputs 
through your AV receiver remote.
Connectors: Choose a Video Out connector and 
corresponding cable that attaches to the back of your TV:
Equipment: The TV, AV receiver, and some cables are 
sold separately. See the documentation that came with 
your TV and AV receiver.
Configuration: You can adjust the TV display, after 
initial turn on, using the Media Center software settings. 
See “Initial Configuration” on page 127.
Procedure:
1
Connect a video cable from the HP Digital 
Entertainment Center back panel Video Out to the 
AV receiver Video In.
2
Connect a video cable from the AV receiver Video 
Out to the TV Video In. Use the same connector type 
if your AV receiver does not support cross-
connecting.
Standard 
definition 
TV
High 
definition 
display
Monitor
Component 
(Y, Pb, Pr)
Component 
(Y, Pb, Pr)
VGA VGA 
HDMI HDMI 
If your TV and AV receiver has multiple input 
and output connections, then it has front 
panel input and output switches.
You must select the correct input and output 
from the TV and AV receiver front panel or 
remote control to hear sound and see video.
Component video output requires specific 
configurations for certain display types and 
resolutions. Go to http://www.hp.com/
support and select your model number for 
instructions on using component video.