HP (Hewlett-Packard) 2000491 Manuel D’Utilisation

You must adjust the audio settings in two places after you 
have installed and connected the HP Digital Entertainment 
Center to your audio system.

Configure both the Media Center speaker settings and 
audio for the DVD player.

The following table shows which procedures to perform 
for your audio system. If you set up speakers using the 
Media Center Optional Components wizard, then set up 
the audio for the DVD player only.

2 (default)

2 speakers; 
Dolby Surround 
Compatible
(default)

Default, no audio output configuration required.

5.1

5.1

7.1

7.1

Digital Audio
S/PDIF on
(default)

Digital Audio
S/PDIF off
(default)

If you use digital audio, the Media Center S/PDIF default setting is on, 
but the DVD Player S/PDIF default setting is OFF. You must change the 
DVD S/PDIF default setting to ON to hear all channels in DVD digital 
audio.