HP (Hewlett-Packard) Digital Entertainment Center Manuel D’Utilisation
Connecting Video Out
71
Connecting V
ideo Out
Video Out to TV and Monitor
Switching: If you have multiple audio/video inputs on
your TV or monitor, you can use your TV or monitor as an
audio/video switch. You can use a TV remote control to
switch inputs. If your AV receiver switches video and has
the correct connections, you can connect your TV or
monitor through your AV receiver.
your TV or monitor, you can use your TV or monitor as an
audio/video switch. You can use a TV remote control to
switch inputs. If your AV receiver switches video and has
the correct connections, you can connect your TV or
monitor through your AV receiver.
Connectors: For a television, choose one of the
following Video Out connectors and cables:
following Video Out connectors and cables:
■
Video (composite)
■
S-video
■
Component (Y, Pb, Pr)
For a monitor, choose one of the following Video Out
connectors and cables:
connectors and cables:
■
VGA
■
DVI
You can use the following combinations to
connect your TV and monitor:
connect your TV and monitor:
You cannot view any combination of Video (composite),
S-video, Component (Y, Pb, Pr) at the same time with dual
displays.
S-video, Component (Y, Pb, Pr) at the same time with dual
displays.
Equipment: The TV, monitor, and some cables may not
be included with the HP Digital Entertainment Center. See
the documentation that came with your TV and monitor.
be included with the HP Digital Entertainment Center. See
the documentation that came with your TV and monitor.
Configuration: You can adjust the TV and monitor
displays, after initial turn on, using the Media Center.
software. See “Initial Configuration” on page 121.
displays, after initial turn on, using the Media Center.
software. See “Initial Configuration” on page 121.
Procedure:
1
Connect a monitor video cable from the HP Digital
Entertainment Center back panel Video Out directly
to the monitor Video In. Use the VGA or DVI Video
Out connectors.
Entertainment Center back panel Video Out directly
to the monitor Video In. Use the VGA or DVI Video
Out connectors.
2
Connect your TV to the HP Digital Entertainment
Center back panel. Use the Video (composite),
S-video, or component (Y, Pb, Pr) Video Out
connectors.
Center back panel. Use the Video (composite),
S-video, or component (Y, Pb, Pr) Video Out
connectors.
3
After initial turn-on, you will need to activate dual
displays. See “Dual screen” on page 134.
displays. See “Dual screen” on page 134.
Display
Use with
VGA
Video (composite)
S-video
Component (Y, Pb, Pr)
DVI
S-video
Component (Y, Pb, Pr)
DVI
DVI
Video (composite)
S-video
Component (Y, Pb, Pr)
VGA
S-video
Component (Y, Pb, Pr)
VGA
n
If the Video Out S-video and Video
(composite) connections are not connected to
a TV or video input when the HP Digital
Entertainment Center is turned on, the S-video
and composite jacks will turn off
automatically.
(composite) connections are not connected to
a TV or video input when the HP Digital
Entertainment Center is turned on, the S-video
and composite jacks will turn off
automatically.
You must restart; press and hold down the
power button for four seconds to restart your
HP Digital Entertainment Center to ensure
Video Out connection to your TV or AV
receiver.
power button for four seconds to restart your
HP Digital Entertainment Center to ensure
Video Out connection to your TV or AV
receiver.
n
Component video output requires specific
configurations for certain display types and
resolutions. Go to your model number page
at http://www.hp.com/support for
instructions on using component video.
configurations for certain display types and
resolutions. Go to your model number page
at http://www.hp.com/support for
instructions on using component video.