Denon AVR-1312 Manuel D’Utilisation

32

Use the auto preset function to program radio stations.

Start
Start the auto preset 
process.

 If an FM station cannot be preset automatically, select the desired 

station by tuning it in manually, then preset it manually.

Set the preset memory block (from A to G) you do not want to display.

Block A – Block G
Select a block to be skipped 
from among preset blocks 
(from A to G).

ON : Display the selected preset memory block.
Skip : Do not display the selected preset memory block.

Video Select
Video of another input 
source is played back 
combined with the playing 
audio.

Source : Play the picture and sound of the input source.
DVD / SAT/CBL / V.AUX / DOCK : Select video input source to view. This 
can be set for individual input sources.

It is not possible to select HDMI input signals.

The input modes available for selection may vary depending on the input source.

Input Mode
Set the audio input modes 
for the different input 
sources.
It is normally recommended 
to set the audio input mode 
to “Auto”.

Auto : Automatically detect input signal and perform playback.
HDMI : Play only signals from HDMI input.
Digital : Play only signals from digital input (OPTICAL/COAXIAL).
Analog : Play only signals from analog input.

• If an input source is “BD”, “GAME”, “DOCK”, “DVD” or “V.AUX” 

“Digital” can be selected by assigning “Input Assign” (

to “OPTICAL” or “COAXIAL” (Selectable items differ depending on the 
input source.) 
If an input source is “TUNER”, the setting is fixed to “Analog”.

• If the input source is set to “BD”, “TV” or “GAME”, it cannot be set to 

“Analog”.

• When digital signals are properly input, the 

 indicator lights on 

the display. If the 

 indicator does not light, check the digital input 

connector assignment and the connections.

Decode Mode
Set the audio decode mode 
for input source.

BD   DVD   TV  

  GAME  

V.AUX   DOCK

Auto : Detect type of digital input signal and decode and play automatically.
PCM : Decode and play only PCM input signals.
DTS : Decode and play only DTS input signals.

 

• This item can be set for input sources for which “OPTICAL” or 

).

• This item can be set for HDMI input sources (BD, DVD, SAT/CBL or 

GAME). 

• Normally set this mode to “Auto”. Set “PCM” and “DTS” when 

inputting the corresponding input signal.

BD