Denon AVR-591 Manuel D’Utilisation

48

Channel Level
Set the volume of the test 
tone to be the same when it 
is output from each speaker.

Test Tone Start : Output test tone.
• FL / C / FR / SR / SBR

z

 / SBL

z

 / SL / FHL / FHR / SW : Select the 

speaker.

 

z

 When the “Speaker Config.” – “S.Back” setting (vpage 47) is set to 

“1sp”, “S.Back” is displayed.

• –12.0dB – +12.0dB (0.0dB) : Adjust the volume.

 

• When 

o

 is pressed while the subwoofer volume is set to “–12 dB”, the 

“Subwoofer” setting switches to “OFF”.

• When “Channel Level” is adjusted, the adjusted values are set for all the 

surround modes. To adjust the channel level separately for the different 
surround modes, use the operation see page 31.

• Speakers set to “None” in the “Speaker Config.” (vpage 46) settings 

are not displayed.

• When a headphones jack is inserted in the PHONES jack of this unit, the 

“Channel Level” is not displayed.

Default : The “Channel Level” settings are returned to the default settings.
• Yes : Reset to the defaults.
• No : Do not reset to the defaults.

Crossover Frequency
Set the maximum frequency 
of the bass signal output 
from each channel to 
the subwoofer. Set the 
Crossover Frequency to 
suit the bass reproduction 
capability of the speaker 
being used.

Crossover : Set the crossover frequency.
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 

Advanced : Specify crossover frequency for each speaker.
• Front / Center / Surround / S.Back / Front Height : Select the speaker.
• 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz / 

250Hz : Set the crossover frequency.

• “Crossover  Frequency”  can  be  set  when  the  “Bass  Setting”  – 

“Subwoofer Mode” (vpage 47) setting is “LFE+Main”, or when you 
have a speaker that is set to “Small”. 

• Always  set  the  crossover  frequency  to  “80Hz”.  When  using  small 

speakers, however, we recommend setting the crossover frequency to 
a higher frequency.

• For  speakers  set  to  “Small”,  sound  below  the  crossover  frequency 

is  cut  from  the  sound  output.  The  cut  bass  sound  is  output  from  the 
subwoofer or front speakers.

• The  speakers  that  can  be  set  when  “Advanced”  is  selected  differ 

according to the “Subwoofer Mode” setting (vpage 47).
•  When “LFE” is selected, speakers set to “Small” at “Speaker Config.” 

can be set. If the speakers are set to “Large”, “Full Band” is displayed 
and the setting cannot be made.

•  If  set  to  “LFE+Main”,  this  setting  can  be  made  regardless  of  the 

speaker size.

Move the cursor 
(Up/Down/Left/Right)

Confirm the setting

Return to previous menu

Make settings for HDMI video/audio output.

Auto Lip Sync
Make automatic 
compensation for timing 
shift in audio and video 
output.

ON : Compensated.
OFF : Not compensated.

HDMI Audio Out
Select HDMI audio output 
device.

Amp : Play back through speakers connected to the receiver.
TV : Play back through TV connected to the receiver.

 When the HDMI control function is activated, priority is given to the TV 

audio setting (vpage 30 “HDMI control function”).

HDMI Control
You can link operations with 
devices connected to HDMI 
and compatible with HDMI 
Control.

ON : Use HDMI control function.
OFF : Do not use HDMI control function.

• When a device that is not compatible with the HDMI control function is 

connected, set “HDMI Control” to “OFF”. 

• Please consult the operating instructions for each connected component 

to check the settings.

• Refer to “HDMI control function” (vpage 30) for more information about 

the HDMI control function.

• When “HDMI Control” is set to “ON”, it consumes more standby 

power.  If  you  are  not  using  this  unit  for  an  extended  period,  it  is 
recommended that you unplug the power cord from the power outlet.

• “HDMI Control” does not work when the power to the equipment is off. 

Either turn power on or set to standby.

• The HDMI control function controls operations of a TV that is compatible 

with the HDMI control function. Make sure that the TV and HDMI are 
connected when you perform HDMI control.

• If  the  “HDMI  Control”  settings  have  been  changed,  always  reset  the 

power to connected devices after the change.

Standby Source
Sets the HDMI input source 
to put into standby when 
the power is on.

Last : This item is set at the last-used input source.
HDMI1 / HDMI2 / HDMI3 / HDMI4 : Put the respective input source into 
standby.

 “Standby Source” can be set when “HDMI Control” is set to “ON”.

Power Off Control
Links the power standby 
of this unit to external 
equipment.

All : If power to a connected TV is turned off independently of the input 
source, power to this unit is automatically set to standby.
Video : If power to a connected TV is turned off when the input source 
is BD / DVD / TV / SAT/CBL / GAME / V.AUX / DOCK, power to this unit is 
automatically set to standby.
OFF : This unit does not link with power to a TV.

 “Power Off Control” can be set when “HDMI Control” is set to “ON”.