Epson 8350 Manuel D’Utilisation

Making Detailed Adjustments

■ Video Signal

Leave this setting on 

Auto

 so the projector can automatically interpret the format, such as 

NTSC or PAL (for standard TV formats). 

■ Component

Change this setting to match the type of equipment connected to the Component port. 
For component video, select 

Auto

 to let the projector automatically interpret the signal; 

or select 

YCbCr

 or 

YPbPr

 to manually select your video equipment’s signal.

■ Trigger Out

Turn on this setting to have the 

Trigger out

 port output a 12-volt signal to lower your 

projection screen when the projector is running. For the Home Cinema 8700 UB, select 

Power

 to signal when your projector is turned on, or 

Anamorphic Wide

 to engage a 

motorized anamorphic lens (commercially available) when that aspect ratio is selected.

Note: If you change this setting, the new setting will take effect the next time you turn the 
projector on.

■ Illumination

Turn off this setting to deactivate the lights on the projector’s Ppower and 

source 

buttons. Use this setting if you find the lights distracting in a darkened room.

■ Sleep Mode

Turn off this setting if you don’t want the projector to enter sleep mode. (Sleep mode 
shuts the projector off automatically when there is no video signal.) 

Select 

5min.

, 

10min.

, or 

30min. 

as the length of time before shutoff; decreasing the time 

conserves power and extends the life of the lamp. 

To turn the projector back on, press the Ppower button on the remote control or the 
projector.

■ Child Lock

Lets you lock the Ppower button on the projector’s control panel to make it more 
difficult for a child to turn on the projector. See page 32 for more information.

Settings > Input Signal > Video Signal

Settings > Input Signal > Component

Settings > Trigger Out

Settings > Illumination

Settings > Sleep Mode

Settings > Child Lock