Epson 5020UBE Manuel D’Utilisation

Making Detailed Adjustments

If the image quality isn’t what you expect, one or more settings may be adjusted improperly. 
If necessary, you can restore the projector to its factory-default (original) settings. 

To restore the settings in a specific menu (such as the Image or Settings menu), open that 
menu, select 

Reset

, and confirm as needed. The example below shows how to reset the 

Image menu settings:

You can also reset the lamp usage timer or restore all the projector settings to their original 
values. Follow these steps:

1. Press the 

Menu

 button on the remote control.

2. Open the 

Reset

 menu.

3. Do one of the following:

■

Select 

Reset Lamp Hours 

to clear the lamp usage timer and reset it to zero. 

You should reset the lamp timer only when you install a new projector lamp. See 
page 75 for more information.

■

Select 

Reset Memory

 to clear all memory settings.

■

Select 

Reset All 

to return all projector settings to their original defaults (except Input 

Signal, User Button, Language, and Lamp Hours).

Open the Image 
menu . . .

and select Reset