Epson 5020UB Manuel D’Utilisation

Making Detailed Adjustments

Use the settings in this section to adjust the image size and position, suppress on-screen text, 
and select basic setup options.

Before adjusting any of these settings, make sure you have already selected an appropriate 
aspect ratio for the type of picture you’re viewing (see page 30). 

■ Overscan

For component, WirelessHD, and HDMI video formats, this setting lets you see the 
edges of the image that are not normally visible in the picture (see page 89). If you see 
interference when you set Overscan to Off, try adjusting the Position as described below. 

Note: The Auto setting is only available when the input source is HDMI1, HDMI2, or 
WirelessHD.

■ Position

Note: This setting cannot be used with a signal input through the HDMI1 or HDMI2 port or the 
WirelessHD connection (PowerLite Home Cinema 5020UBe only).

Use the arrow buttons to fine-tune the position of the image on the screen.

■

Aspect

This setting lets you change the aspect ratio of your image, and works the same as 
pressing the 

Aspect

 button on the remote control. See page 30 for more information.

Note: When displaying 720p, 1080i, or 1080p signals through the WirelessHD, HDMI or 
Component video port, the aspect ratio is automatically selected and you cannot change it. For 
information on configuring an anamorphic display, see page 28.

If you display a 4:3 image using the Zoom setting, the top and bottom will be cut off. You can 
use the Zoom Caption Pos. option and other settings to resize and reposition the image.

For details on how the projector resizes the picture when you choose an Aspect setting, see 
page 89.

Signal > Advanced > Overscan

Signal > Position

Signal > Aspect