Epson 5020UB Manuel D’Utilisation

Using WirelessHD

If you have connected a television or other display to the output port on the transmitter and 
want to switch between wired and wireless display modes, press the 

Output

 button on the 

remote control or transmitter.

Note: The WiHD light on the transmitter will light up when the wireless display mode is active.

If you’ve connected multiple video sources to the WirelessHD Transmitter, you can use the 
Picture-in-Picture (P-in-P) feature to wirelessly project images from two separate video 
sources at the same time.

Make sure the video sources you want to project from are turned on, then follow these steps:

1. Press the 

P-in-P

 button on the remote control to enable P-in-P projection.

2. Do the following to control the P-in-P display:

■

Press the 

Input 

button on the remote control or the WirelessHD Transmitter to 

change the video source displayed in the sub-screen. Keep pressing the button to 
cycle through all of the connected video devices.

■

Press the 

Output

 button to change the position of the sub-screen. The screen moves 

counter-clockwise from corner to corner each time the 

Output

 button is pressed.

Remote control

WirelessHD Transmitter