Epson 5020UB Manuel D’Utilisation

Using HDMI Link

3. Press the 

HDMI Link

 button to exit the menu system.

4. Set up your connected devices so their HDMI CEC-compatible functions are enabled. 

For details, refer to the device manufacturer’s documentation.

1. Press the 

HDMI Link

 button on the projector’s remote control.

2. Select 

Device Connections

. You see this screen:

Note: WirelessHD is only available on the PowerLite Home Cinema 5020UBe.

3. Use the u and d arrow buttons to select the device you want to operate, then press 

Enter

. Devices are listed by type (Player, Recorder, AV System, or Tuner) and by name, 

if the model number is available.

4. Once the device is selected, use the HDMI Link control buttons on the remote control to 

operate it. You can also use the 

On

, 

Standby

, 

Enter

, 

Esc

, and arrow buttons. 

Commonly available functions include turning on the device when it’s in standby mode, 
starting playback, adjusting the volume, and operating the device’s link menu.

In addition, HDMI Link allows your projector and other devices to be turned on and off 
together:

■

If you turn on a connected device, the projector automatically turns on and switches 
to the correct input source.

Note: The power switch on the back of the projector must be turned on for this to work.

■

If you turn on the projector, connected devices such as an amplifier and Blu-Ray 
player are turned on. If multiple video devices are connected, the one last used is 
turned on. When you turn off the projector, the connected devices are turned off.

Note: The CEC power link function of the connected devices must be enabled for this to work.