Toshiba H6A-HLS Manuel De Montage

 

 

- 2 - 

 

 
DO NOT attempt to install, operate, perform maintenance, or dispose of this equipment until 
you have read and understood all of the product labels and user directions that are contained 
in this manual. 
Warning labels that are attached to the equipment will include the exclamation mark within a 
triangle. 
DO NOT remove or cover any of these labels. If the labels are damaged or if additional labels 
are required, contact the Toshiba Customer Support Center. 
Labels attached to the equipment are there to provide useful information or to indicate an 
imminently hazardous situation that may result in serious injury, severe property and 
equipment damage, or loss of life if safe procedures or methods are not followed as outlined 
in this manual. 
 

 
Installation, operation, and maintenance shall be performed by Qualified Personnel ONLY. 
A Qualified Person is one that has the skills and knowledge relating to the construction, 
installation, operation, and maintenance of the electrical equipment and has received safety 
training on the hazards involved (Refer to the latest edition of NFPA 70E for additional safety 
requirements). 
Qualified Personnel shall: 
• Have carefully read the entire manual. 
• Be familiar with the construction and function of the ASD, the equipment being driven, and 
the hazards involved. 
• Be able to recognize and properly address hazards associated with the application of 
motor-driven equipment. 
• Be trained and authorized to safely energize, de-energize, ground, lock-out/tag-out circuits 
and equipment, and clear faults in accordance with established safety practices. 
• Be trained in the proper care and use of protective equipment such as safety shoes, rubber 
gloves, hard hats, safety glasses, face shields, flash clothing, etc., in accordance with 
established safety practices. 
 
For further information on workplace safety, visit www.osha.gov.