GE 106687 Manuel D’Utilisation

5

Assemble the cleaner completely before plugging into an electrical outlet.

Moving parts, stay clear of brush roll when plugging in. Make sure brush roll is clear of moving parts
when plugging in.

Features may vary by model yet all parts assemble the same.

1. Remove vacuum body and handle from carton.

Locate the handle release button on body and the
handle tabs on handle.

2. Position handle above vacuum body. Line up the

handle tabs to the notches in the opening at the
top of the vacuum body.

3. Press down on the handle release button as shown

above. Slide the handle down into the unit, until
it clicks into place.