Kambrook KHV100 Manuel D’Utilisation

5.  Then simply reinsert the filter pouch into  

 

the filter bracket (which is sitting in the  

 

dust cup)

6.  Place the dust cup back into the hand vac  

 

unit by fitting the grooves in the dust cup  

 

onto the locks of the unit.

7.  Twist the dust cup in an clockwise   

 

position until you hear a click.

8.  Place the unit back onto the charging base  

 

to charge up for its next use.

Thoroughly cleaning the dust cup and filters on 

a regular basis will improve the performance of 

the unit.

To clean the outside of the unit, wipe the 

exterior with a soft, damp cloth. Never use an 

abrasive cleaner. 

Empty the dust cup on a regular basis. Clean 

the filters on a regular basis.

Filters must be cleaned from time to time to 

remove the fine dust particles that have been 

collected. 

1.  Remove the filter pouch, followed by the  

 

filter bracket by lifting them vertically from  

 

the dust cup.

2.  Shake and tap the filters until all the fine  

 

dust particles are removed.  

3.  The filter pouch and filter bracket can be  

 

rinsed in luke warm water. Ensure you  

 

let the filter pouch and filter bracket  

 

completely dry naturally before next use.

4.  To place the filters back in the dust  

 

container firstly return the filter bracket  

 

directly into the dust cup.

Dirt and debris picked up by your vacuum will 

collect in the dust cup. The dust cup should be 

emptied when full. 

Always switch the appliance off prior to 

replacing filters or emptying the dust cup.

To remove the dust cup locate the release 

button situated half-way along the underside of 

the hand vac. With one hand press the release 

button in an upward direction.

With the other hand hold onto the dust cup 

and turn in a anti-clockwise direction until the 

dust cup is released and then lift upwards. 

To empty the dust cup simply remove the two 

filters and empty the dirt and debris straight 

into a bin. 

IMPORTANT: DO NOT USE THE UNIT 

WITH OUT A DUST CUP OR FILTERS IN 

PLACE

Remove all packaging from the unit.

Ensure that the dust cup and filters are 

correctly fitted. 

Please charge the battery for 16 hours before 

first use.

To commence vacuuming, remove the hand vac 

from the charging base. 

Push the on/off button, at the top of the 

unit in an upward direction to switch 

the unit on. You must leave your finger 

in the ‘on’ position when vacuuming. 

When vacuuming is complete, push down on 

the ‘on/off’ button to the “off” position. Place 

the unit immediately back on the charger after 

each use.

 ALWAYS ENSURE THAT THE DUST 

CUP AND THE FILTERS ARE CORRECTLY 

FITTED. NEVER OPERATE WITHOUT THE 

DUST CUP AND FILTERS IN PLACE.

The crevice tool is ideal for vacuuming hard to 

reach places such as the edges along skirting 

boards, the crevice of car seats and corners.

Simply extend the crevice tool from the unit by 

pulling the crevice tool away from the unit. 

To retract the crevice tool, press the release 

button under the nozzle and push the crevice 

back into the unit.

KHV100_V2.indd   4-5

22/5/07   2:50:58 PM