HP (Hewlett-Packard) HP 8360 Manuel D’Utilisation

 

Coupling 

 

 

 

 

Menu

“Optimizing Synthesizer Performance” in Chapter 1.
“Programming Typical Measurements” in Chapter 1.

POWER

5

This 

 applies flatness correction to the synthesizer RF output.

If no array has been created, pressing this key applies 0 

 of flatness

correction at all points. The yellow LED above the 

 lights

when user flatness correction is on.

SCPI: 

CORRection[:STATe] 

Analyzer: 

NONE

 Menu

“Optimizing Synthesizer Performance” in Chapter 1.

FM Coupling 

4

This 

 (Option 002 only) lets you set the FM input to be

AC-coupled. If you choose AC-coupled FM, you will be modulating a
phase locked carrier. This is the specified synthesized operation. You

must modulate at a 100 

 rate or greater. If not, the frequency

changes caused by the modulation are inside the phase locked loop
bandwidth and the output will not be linear FM. For modulation

frequencies below 100 

 choose DC-coupled FM.

An asterisk next to the key label indicates that AC FM coupling is
selected. This selection is the factory preset default.

For synthesizers without Option 002, see FM 

 

 

 .