HP (Hewlett-Packard) HP 8360 Manuel D’Utilisation

Leveling Mode

 f

ALC

This 

 lets you open the ALC loop. Direct and separate control

of the linear modulator circuit (LVL DAC) and attenuator (ATN)
is possible (see Figure A-l). The power level must be set using an
external indicator (power meter/sensor). If the power level is set
when the synthesizer is in CW mode and then pulse modulation is
activated, the peak pulse level equals the CW level. The attenuator
value is set via the Set 

 

 in the POWER menu.

An asterisk next to the key label indicates that this feature is active.

POWer:ALC:STATe 
POWer:ATTenuation:AUTO 

Analyzer: 

 

“Working with Mixers,” in Chapter 1.