HP (Hewlett-Packard) HP 8360 Manuel D’Utilisation

Outputs a 50 ns wide TTL pulse synchronized to the leading edge of
the internally-generated pulse. (BNC female, rear panel.)

Outputs the internally-generated AM or FM waveform. This output
can drive 50 ohms or greater. The AM output is scaled the same as

it is generated, either 

or 10 

 The FM scaling depends

on the FM deviation selected. (BNC female, rear panel.)

 10 MHz to 20 

2 to 20 

 10 MHz to 20 

 High Power

 2 to 20 

 High Power

10 MHz to 26.5 

10 MHz to 40 

10 MHz to 50 

With this option, minimum 

 output power is -110 

Maximum leveled output power is lowered by 1.5 

 to 20 

 and

2 

 above 20 

 and 2.5 

 above 40 

Adds a digitally-synthesized internal modulation waveform
source-on-a-card to the HP 8360. It provides signals that would
otherwise be supplied to the external modulation inputs.

For security, tamper-resistance and cost savings in automated
system applications, this option deletes the keyboard and display.
Option 003 does not move the front panel connectors to the rear
panel, however, so in most cases, Option 004 should be ordered in
conjunction with Option 003.

Moves the RF Output, External ALC Input, Pulse Input/Output,

AM Input, and FM Input connectors to the rear panel.

Improves pulse rise/fall time to 10 ns. Also effects maximum leveled
output power and harmonic performance.