Nilfisk-Advance America IVB 7-H Manuel D’Utilisation

10

english

IVB 3-H
IVB 5-H
IVB 7-H

1. After picking up hazardous 

dust, vacuum clean the out-
side of the cleaner.

2.  Switch off the vacuum clean-

er and pull the mains plug 
out of the socket.

 

3. Remove the suction hose 

form the vacuum cleaner and 
close the inlet fitting (1) with 
the plug (2).

4.  Wind up the power cord and 

hang it on the handle.

5.  Empty the tank and clean the 

vacuum cleaner.

6.  After picking up liquids: Store 

the upper section of the 
cleaner separately so that 
the filter element can dry.

7. Store the vacuum cleaner 

in a dry room where it is 
protected from unauthorized 
use.

7.2.1

Replacing the waste bag



7.2.2

Replacing the safety filter bag



7.2.3

Replacing filter element „H“ (IVB 3-H)



7.2.4

Replacing filter element „H“ (IVB 5-H/7-H)



7.2.5

Emptying dirt tank (IVB 3-H/IVB 5-H)



7.2.6

Emptying dirt tank (IVB 7-H)



IVB 3-H/IVB 5-H:
1. Open the retaining clamps 

and remove the upper sec-
tion of the cleaner from the 
dirt tank.

2.  Carefully remove the waste 

bag connection (1) from the 
inlet fitting.

3.  Close the waste bag connec-

tion with the slide (2).

4.  Close the waste bag using 

the cable binder (3).