Nilfisk-Advance America RS 501 Manuel D’Utilisation
SERVICE MANUAL
ENGLISH
RS 501
33015500(3)2008-02
67
DRIVE SYSTEM
REVERSE GEAR BUZZER SENSOR DISASSEMBLY/ASSEMBLY
Disassembly
Engage the parking brake with the lever (66).
Turn the ignition key (76) to OFF position and remove it.
Cut the cable clamp (A) under the right side of the cab.
Disconnect the reverse gear buzzer activation sensor connector (B).
Remove the four mounting screws (D) of the drive pedal (E).
Slightly lift the drive pedal (E) and remove the mounting nut (F) of the sensor (C).
Remove the sensor (C), the harness (G) and the connector.
Turn the ignition key (76) to OFF position and remove it.
Cut the cable clamp (A) under the right side of the cab.
Disconnect the reverse gear buzzer activation sensor connector (B).
Remove the four mounting screws (D) of the drive pedal (E).
Slightly lift the drive pedal (E) and remove the mounting nut (F) of the sensor (C).
Remove the sensor (C), the harness (G) and the connector.
Assembly
Assemble the components in the reverse order of disassembly.
Adjust the reverse gear buzzer activation sensor (see the procedure in the relevant paragraph).
Adjust the reverse gear buzzer activation sensor (see the procedure in the relevant paragraph).
A
A
B
E
D
C
D
F
C
G
S301411
1.
2.
3.
4.
5.
6.
7.
2.
3.
4.
5.
6.
7.
8.
9.
9.