Nilfisk-Advance America IVB 5-H Manuel D’Utilisation

Page de 19
06
english
IVB 3-H
IVB 5-H
IVB 7-H
3 Before start-up
3.1 
Assembling the cleaner
1. Open the retaining clamps 
and lift off the upper section 
of the cleaner.
2.  Take the accessories out of 
the dirt tank and the packag-
ing.
3.  To pick up dust with maxi-
mum room concentration 
values:
 
Insert the filter bag into the 
dirt tank according to the 
instructions (instructions in-
cluded).
 
To pick up harmless dust:
  Insert the disposal bag (in-
structions included) into the 
tank.
 IMPORTANT:  P r e s s 
the filter bag connection 
firmly on to the inlet fitting.
4.  Fit the upper section of the 
vacuum cleaner and close 
the retaining clamps.
 NOTE
Ensure that the 
retaining clamps fit properly.
4 Operation
4.1 Connections
4.1.1  Connecting the suction 
hose
1.  Connect the suction hose.
The suction hose diameter must 
suit the position of the switch in 
order to pick up dry, nonflam-
mable dust with maximum room 
concentration values.
CAUTION!
On delivery some of the accesso-
ries are lying in the tank and must 
be removed before the vacuum 
cleaner is used for the first time.
Remove the upper section of the 
vacuum cleaner:
The mains plug should not be in-
serted into a socket.
4.1.2 Electrical connection
The operating voltage shown on the 
rating plate must correspond to the 
voltage of the mains power supply.
   
1.  Ensure that the vacuum 
cleaner is switched off.
2.  Insert the power cord into a 
properly installed and fused 
socket with an earthing con-
tact.