Nilfisk-Advance America 12D Manuel D’Utilisation

 10 

USING THE WAND (OPTIONAL) 

The Wand  (13) is not supplied as a standard item in all variants 
of these machines. To use the wand:
1.  Push the machine to upright locked position. The brush motor will 

then stop (Dual-version only), and the brush will be lifted up 
from the surface on single motor versions. 
Then slide the Wand out of its holder. 

2.  Use the wand for cleaning hard to reach places like fl oor corners, 

or furnitures.  

1

2

USING THE TOOLS (OPTIONAL) 

These tools are not standard items in all machine variants. 
Use these tools for a better cleaning performance at hard to reach 
areas.  A Crevice Tool (14) and Upholstery Tool (21) is placed 
conveniently on the machine, just behind the wand. 

Remove the wand from the vacuum cleaner and you will have free 
access to the Tools. 

1. The Upholstery Tool is placed in the upper section of the cleaner.
2. The crevice tool is placed in the lower section of the cleaner.

  

IMPORTANT ! 

Foot pedal must be used 
to release base to 
operating/non operation 
position. Failure to do so 
could result in damage to 
the release  
mechanism. 

3.  Install the Crevice Tool or Upholstery Tool on the end of the Wand, 

or on the end of the hose, which can be detached from the wand, if 
desired. Now the vacuum cleaner will have an extended coverage 
performance and can be used for cleaning hard to reach areas like 
roof strips, or furnitures.

IMPORTANT ! 

Foot pedal must be used 
to release base to 
operating/non operation 
position. Failure to do so 
could result in damage to 
the release  mechanism. 

1

2

3

3