Nilfisk-Advance America AX 310 Manuel D’Utilisation

B-10 - FORM NO. 56041672 - AX 310

If the possible causes listed below are not the source of trouble, it is a symptom of something more serious.  Contact your Nilfi sk Service Center 
immediately for service.

The Circuit Breaker (D) is located on the Control Panel; it protects the electrical circuit and brush motor from damage due to overload conditions.  If the 
circuit breaker is tripped try to determine the cause.
Brush Circuit Breaker (3 Amp) Possible cause may be:
1  Debris wrapped around the brush drive (remove debris)
2  Electrical short circuit (have your Nilfi sk Service Center or qualifi ed electrician check the machine)
Once the problem has been corrected, push the button in to reset the circuit breaker.  If the button does not stay in, wait 5 minutes and try again.  If the 
circuit breaker trips repeatedly, call your Nilfi sk Service Center for service.

Possible causes may be:
1  Recovery Tank Full (empty recovery tank)
2  Recovery hose is kinked or damaged (replace the hose)
3  Recovery tank dome lid gasket leak (replace gasket)
4  Debris caught in vacuum shoe or recovery hose (clean vacuum shoe and recovery hose)

Possible causes may be:
1  Solution tank empty (fi ll solution tank)
2  Solution lines or screen clogged (fl ush lines and screen)

Model No.

56265302

56265303

Voltage/frequency

V/Hz

220-240 / 50-60

100 / 50-60

Rated Current

Amp

3.5

6.7

Protection Class (electrical)
Protection Grade

IP34

--

Sound Pressure Level IEC 60335-2-72: 2002 Amend. 1:2005, ISO 11201

dB (A)/20μPa

76

75

Total Weight

lbs/kg

67 / 30

67 / 30

Vibrations at the Hand Controls (ISO 5349-1)

m/s

2

0.87m/s

2

0.87m/s

2

Solution Tank Capacity

5 gal (19l)

5 gal (19l)