Samsung DJ68-00264B Manuel D’Utilisation

16_ Maintain tools and filter

brushbar Replacement
1.  Remove the tool from the pipe, and turn 

upside down.

     Slide the switch to unlock position and remove 

bottom plate.

2. Remove brushbar and discard.

3.  Inspect belt to ensure that it is in good 

condition. If broken or cracked, please replace. 

(See below for details.)

4.  With the curved ends facing down, slide end 

plates of brushbar into slots on the tool.

5.  To replace bottom plate, insert the four tabs on 

edge of bottom plate into slots on front of tool. 

Pivot bottom plate down and snap closed.

belt Replacement
1. Grasp turbine and pull firmly to remove.

2.  Remove belt from turbine pulley. Replace with 

new belt.

3.  With flat sides of turbine retainers pointing 

down, slide retainers into grooves in tool 

housing and snap into place.

4. Replace brushbar and bottom plate.

Cleaning brushbar
Cut off pet hairs or threads surrounding brush by 

using scissors.

Maintain tools and filter

carton contents