Panasonic MC-CG885 Manuel D’Utilisation
16
D-5
D-6
D-7
D-8
D - MAINTENANCE AND SERVICING
Power nozzle care
Always follow all safety precautions before performing
maintenance to the power nozzle.
maintenance to the power nozzle.
WARNING
• Electrical Shock or Personal Injury Hazard.
• Disconnect the electrical supply before performing
• Disconnect the electrical supply before performing
maintenance to the vacuum cleaner. Failure to do
so could result in electrical shock or personal injury
from vacuum cleaner suddenly starting.
so could result in electrical shock or personal injury
from vacuum cleaner suddenly starting.
Inspect once a month.
D-5
Unscrew the two agitator cover screws on the bottom of
the power nozzle.
the power nozzle.
D-6
To remove the power nozzle cover, grasp the side
latches and pull out first.
Then grasp the rear latches and pull out.
latches and pull out first.
Then grasp the rear latches and pull out.
D-7
Lift agitator assembly out and remove the belt.
Using an old tooth brush or similar tool, clean any dirt or
lint from the brush.
Using an old tooth brush or similar tool, clean any dirt or
lint from the brush.
D-8
Then cut across threads, strings, hairs, etc. from the
beater bar with a pair of scissors.
(Removal as per reverse procedure)
beater bar with a pair of scissors.
(Removal as per reverse procedure)
NOTE:
Take care not to cut the brush. Do not wash in water.
MC-CG880(V01Z5L00U)_0818.indd 16
MC-CG880(V01Z5L00U)_0818.indd 16
2008/08/19 18:41:53
2008/08/19 18:41:53