Emerson Series 3000 MVD Manuel D’Utilisation

Configuration and Use Manual

167

Operation Mode – Custody Transfer

Operation Mode

–

Ba
tc

otaliz

er
s and In

ve
ntories

Ope

ration

Mode – Custod

y T
ra

fer

Op
eratio

n M

Print job status

For some printer types, a discrete output can be configured to indicate that the ticket could not be
printed (see Section 8.3.2), for one of these two reasons:

•

The last ticket print request failed.

•

The flow rate is not zero.

If either of these situations occurs, the discrete output is activated.

19.5.5

Transfer log

Note: The transfer log is used only for transfer (OIML) transactions. The transfer log does not
contain entries for batch (NTEP) or batch (OIML) transactions.

Whenever a transfer is completed, transfer data is added to the transfer log. The entry may contain the
transfer totals, or the transfer totals and inventories, and the transfer variable may be marked with
asterisks, depending on configuration (see Section 14.5). An example transfer log entry is shown in
Figure 19-1.

If a ticket is printed but the transfer is not completed, no data is added to the transfer log.

You may view data from the transfer log for the 20 most recent transfers. To do this:

1. Select

Transfer Log

from the View menu.

2. Use the

Select BOL to View

option to specify the transfer you want to view. Log data for the

selected transfer is displayed automatically.

Figure 19-1

Example transfer log entry

Note: If the Transfer Start (BOL) parameter is changed, the transfer log is reset and all transfer data
is lost.

Note: It is not possible to print the transfer log or retrieve it via digital communications.

Transfer Log

Transfer Not Printed

M. RESET
5-MAR-2007 19:19:02
Transfer (BOL):
1

Complete

Mass Transfer
*

100.000 kg *

Volume Transfer

10000.000 l

EXIT