Emerson 9739 Manuel D’Utilisation

Tip

Scroll Rate

may not be available until you apply Auto Scroll.

5.1.6

Enable or disable the display backlight

Display

OFF-LINE MAINT

> OFF-LINE CONFG > DISPLAY > BKLT

ProLink II

ProLink

> Configuration > Display > Display Options > Display Backlight On/Off

Field Communicator

Not available

Overview

You can enable or disable the display backlight.

Procedure

Enable or disable Backlight.

The default setting is Enabled.

5.1.7

Enable or disable Status LED Blinking

Display

Not available

ProLink II

ProLink

> Configuration > Display > Display Options > Display Status LED Blinking

Field Communicator

Not available

Overview

By default, the status LED blinks (flashes) to indicate unacknowledged alarms. If you
disable Status LED Blinking, the status LED does not blink, whether alarms are acknowledged
or not. It still changes color to indicate active alarms.

Procedure

Enable or disable Status LED Blinking.

The default setting is Enabled.

5.2

Enable or disable operator actions from the

display

You can configure the transmitter to let the operator perform specific actions using the
display.

You can configure the following:

Configure device options and preferences

Configuration and Use Manual