Emerson 2400S Manuel D’Utilisation

35

All models with or without display

• Suitable for hazardous area installation.

• User interface module can rotate 360° on the transmitter in 90° increments.

• Three-color status LED on user interface module indicates flowmeter condition at 

a glance, using a solid green, yellow, or red light. Zero in progress is indicated by 
a flashing yellow light.

• Two clips for service port connections (requires removing transmitter housing 

cover).

Model 2400S Analog with or 
without display

• Two clips for HART/Bell 202 connections (requires removing transmitter 

housing cover).

• HART security switch (requires removing transmitter housing cover).

Model 2400S DeviceNet, with or 
without display

• Three rotary switches for selecting network address and baud rate (network 

address and baud rate are also software selectable).

• Module and network LEDs to indicate DeviceNet status.

Model 2400S PROFIBUS-DP, with 
or without display

• Three rotary switches for selecting network address (network address is also 

software selectable).

• DIP switch for enabling internal termination resistor.

• Address and network LEDs that indicate PROFIBUS-DP status.

All models with display

• Depending on purchase option, transmitter housing cover has glass or 

plastic lens.

• User interface module includes LCD panel. LCD line 1 displays process variable; 

line 2 displays engineering unit of measure.

• Display update rate is user-configurable: 1 to 10 seconds at 1-second increments.

• Display backlighting may be adjusted or turned off.

• Operator access to transmitter menus is provided via optical switches that are 

operated through the lens. LED indicators show when a “button” has been 
pressed.

• Infrared port allows access to service port from IrDA device (e.g., PDA running 

Pocket ProLink) without removing transmitter housing cover.

All models without display

• Transmitter housing cover is all metal (no lens).

• Access to user interface requires removing transmitter housing cover.

• Zero button allows flowmeter zero from field (requires removing transmitter 

housing cover).

• No  IrDA.