Sennheiser SR 2050 IEM Manuel D’Utilisation
Using the operating menu
19
When the standard display is shown on the display panel, you can get into the main menu by
pressing the jog dial. The extended menu “
pressing the jog dial. The extended menu “
Advanced Menu
” and the other menus can be
accessed via the corresponding menu items.
Display
Function of the menu item
Main menu “
Menu
”
Sensitivity
Adjusts the input sensitivity
Easy Setup
Deactivates the RF signal and activates Easy Setup Sync (see page 15)
Mode
Selects mono or stereo operation
Frequency Preset
Changes the frequency bank and the channel
Name
Enters the transmitter name
Equalizer
Changes the frequency response of the output signal using a graphic
equalizer
equalizer
AutoLock
Activates/deactivates the automatic lock mode
Advanced
Calls up the extended menu “
Advanced Menu
”
Exit
Exits the operating menu and returns to the standard display
Extended menu “
Advanced Menu
”
Tune
Sets the transmission frequencies for the frequency banks “
U1
” to
“
U6
”
Special function: Sets a channel and a transmission frequency for the
frequency banks “
frequency banks “
U1
” to “
U6
”:
왘
Select this menu item and call it up by pressing the jog dial
until
the channel selection appears.
Sync Settings
Adjusts the receiver parameters to be transferred to the receiver and
activates/deactivates the transfer (see table on page 15)
activates/deactivates the transfer (see table on page 15)
RF Power
Adjusts the transmission power
Warnings
Calls up the submenu “
Warnings
”
LCD Contrast
Adjusts the contrast of the display panel
Reset
Resets the transmitter
IP-Address
Adjusts the IP address of the transmitter
Software Revision
Displays the current software revision
Exit
Exits the extended menu “
Advanced Menu
” and returns to the main
menu
Submenu “Warnings”
Activates/deactivates warnings (color change and warning messages):
AF Peak
Audio overmodulation
RF Mute
RF signal is deactivated
Exit
Exits the submenu “
Warnings
” and returns to the extended menu
“
Advanced Menu
”