Rinnai Infinity 32e Manuel D’Utilisation
11
Congratulations on purchasing the Technologically Advanced, Temperature Controlled,
Rinnai Hot Water System.
Rinnai Hot Water System.
•
The Rinnai Infinity 32e and HD70e NEVER RUN OUT of hot water. As long as
electricity, water, and gas supplies are connected, hot water is available when hot
water taps are open.
electricity, water, and gas supplies are connected, hot water is available when hot
water taps are open.
•
Built into the main micro-processor is the facility to LIMIT THE MAXIMUM
TEMPERATURE of the hot water supplied. The water temperature may be limited to
various maximum temperatures. This is particularly useful when the hot water unit is
installed where young children or the infirm may be using the hot water. The Infinity
32e is delivered with a preset temperature of 55
TEMPERATURE of the hot water supplied. The water temperature may be limited to
various maximum temperatures. This is particularly useful when the hot water unit is
installed where young children or the infirm may be using the hot water. The Infinity
32e is delivered with a preset temperature of 55
0
C, and the HD70e is delivered with a
preset temperature of 65
0
C. If required, the temperature limits can be changed by an
authorised person. For further information, please contact Rinnai.
•
The Rinnai Infinity and HD external units are powered flue appliances. This makes it
COMPACT, saving both floor and wall space.
COMPACT, saving both floor and wall space.
•
The temperature of outgoing hot water is CONSTANTLY MONITORED by a BUILT-
IN SENSOR. If the temperature of the outgoing hot water rises to more than 3
IN SENSOR. If the temperature of the outgoing hot water rises to more than 3
°
C
above the selected temperature the burner is shut OFF and only turned ON again
when the temperature falls to below the selected temperature.
when the temperature falls to below the selected temperature.
•
The burner lights automatically when the hot water tap is opened, and distinguishes
when the tap is closed. IGNITION IS ELECTRONIC, so there is no pilot light. When
the hot water tap is off, no gas is used.
when the tap is closed. IGNITION IS ELECTRONIC, so there is no pilot light. When
the hot water tap is off, no gas is used.
•
Up to four temperature controllers can be mounted remotely from the heater. This
offers the following additional features:
offers the following additional features:
Localised temperature setting.
Diagnostic
message.
•
‘Deluxe’ Temperature Controllers are an optional extra. These provide functions
including Bath Fill, Voice Prompt, and Clock Setting.
including Bath Fill, Voice Prompt, and Clock Setting.
•
Temperatures selected at the controllers are retained in the SYSTEM MEMORY.
•
Operating NOISE LEVEL IS VERY LOW.
•
ERROR MESSAGES ARE DISPLAYED on the Temperature Controllers, assisting
with service.
with service.
•
FROST PROTECTION device built in as standard.
FEATURES AND BENEFITS