Emerson Edition 4 Manuel D’Utilisation
Rosemount Tank Radar REX
Chapter 10 Mechanical Installation
Chapter 10 Mechanical Installation
10-30
Installation Manual
308014EN, Edition 4
May 2013
10.3.8 Installation of the RTG 3950 Inclined Version
Follow this instruction when mounting the Inclined version of the RTG
3950 Still-pipe Array antenna on a Still-pipe.
3950 Still-pipe Array antenna on a Still-pipe.
1
Mount the cover on the nozzle
and tighten the flange screws.
Leave two holes free for mount-
ing of the Stand Bracket. The
Stand can be placed on either
side of the cover depending on
which side is most suitable for
the particular installation.
and tighten the flange screws.
Leave two holes free for mount-
ing of the Stand Bracket. The
Stand can be placed on either
side of the cover depending on
which side is most suitable for
the particular installation.
2
Check that the guide pin is
mounted. The guide pin is used
to make sure that the antenna is
properly oriented towards the
transmitter head.
mounted. The guide pin is used
to make sure that the antenna is
properly oriented towards the
transmitter head.
Leave two holes for
the Stand Bracket
3950
_3
_cover_moun
t_gas
ke
t.eps
Guide pin
3950_3_LocationPin.eps