Emerson 308014EN Manuel D’Utilisation
Rosemount Tank Radar REX
Chapter 10 Mechanical Installation
Chapter 10 Mechanical Installation
10-32
Installation Manual
308014EN, Edition 4
May 2013
5
Make sure that the O-ring is
properly seated all around the
cover and that it is pressed
down at the Hand Dip Plate.
properly seated all around the
cover and that it is pressed
down at the Hand Dip Plate.
6
Close the lid and tighten the
locking screw.
locking screw.
7
Place the Stand Bracket on the
desired side of the flange.
desired side of the flange.
Attach the Stand bracket with
the two small screws. These
screws are used in order to
make sure that the Stand
Bracket is properly aligned to
the flange.
screws are used in order to
make sure that the Stand
Bracket is properly aligned to
the flange.
O-ring
Hand Dip
Plate
3950_3_O-ring.eps
Locking screw
3950_3_lockingscrew
.eps
Stand Bracket
Two screws
3950_3_bracket.eps