Emerson Rosemount 2230 Manuel D’Utilisation

300560EN, Rev AA
May 2011

1-5

Rosemount 2230

Section 1. Introduction

Recycling of equipment and packaging should be taken into consideration 
and disposed of in accordance with local and national legislation/regulations.

The label below is put on Rosemount Tank Gauging products as a 
recommendation to customers if scrapping is considered.

Recycling or disposal should be done following instructions for correct 
separation of materials when breaking up the units.

Figure 1-1. A green label is 

placed on the housing of the 

level gauge

Rosemount Tank Radar AB is fully certified according to ISO 14001 
environmental standards. By recycling the corrugated paperboard, or wooden 
boxes, used for shipping our products you can contribute to take care of the 
environment.

Experience has shown that wooden boxes can be used several times for 
various purposes. After careful disassembly the wooden parts may be reused. 
Metal waste may be converted.

Products which have served their time may be divided into wood and metal 
components and the wood can be used as fuel in sufficient ovens.

Due to its low moisture content (approximately 7%) this fuel has a higher 
calorific value than ordinary wood fuel (moisture content approximately 20%).

When burning interior plywood the nitrogen in the adhesives may increase 
emissions of nitrogen oxides to the air 3-4 times more than when burning bark 
and splinter.

NOTE!
Landfill is not a recycling option and should be avoided.

SEP

ARATE

ST

EEL & PLAST

IC