Emerson 1F95-391 Manuel D’Utilisation

26

Press TIME 

 and TIME 

 at the same time to enter the configuration menu. Press

TIME 

 until you get to °C then press the 

 or 

 arrow to select °F, press

PROGRAM 

 to return to normal operation.

Press PROGRAM 

  to make certain the thermostat is in the run program mode, then

to bypass the program and operate the thermostat manually press the MODE 

 

button

to select Heat or Cool (whichever you prefer) and press 

. Use the TEMP 

 

or

TEMP 

 

buttons to set the thermostat on the temperature you want. The temperature

setting you choose will be held until you manually change it using the TEMP 

 

or

TEMP 

 

buttons. The thermostat will remain in the HOLD mode when you change

temperature and maintain whatever temperature you set. If you decide to return to the
program, press PROGRAM 

 to cancel the hold feature.

1. My thermostat is reading
Celsius. How do I change it
to Fahrenheit?

2. How do I bypass (not
use) the program?

Humidifier Control
and Monitoring
When the humidity button is pressed
while in the run mode and in the HEAT
position, the actual humidity will be
displayed on the left side of the
display. HUMD is displayed above
the actual humidity. The humidity set

point is displayed on the right side of
the display.  

 or 

 button

may be pressed to modify the humidity
set point (range 5 to 50). Maximum
displayed humidity is 97% RH and
minimum displayed humidity is 2%
RH. If the heating system is operating
and there is a demand for humidity,

then the humidifier will operate. If the
demand for humidity is not satisfied
for ten consecutive heat cycle
operations, the display will show the
word HUMD for one second and the
word MX for one second signaling
maximum possible humidity is
reached.