3D Connexion 7318 Manuel D’Utilisation
33
Replacing the Light Bulb
WARNING:
When replacing the bulb, switch off and unplug
the machine.
Wait for the light bulb to cool down before
touching it.
the machine.
Wait for the light bulb to cool down before
touching it.
Remove the cap and screw. Remove the face
plate.
plate.
q
Cap
w
Screw
e
Face plate
Push and turn the bulb counterclockwise to
remove it.
Push and turn the bulb clockwise to replace it.
remove it.
Push and turn the bulb clockwise to replace it.
r
Light bulb
q
w
e
r
e
w
e
r
z
x
c
q
Replacing the Bobbin Holder
z
Insert the bobbin holder into the hook race.
x
Make sure the knob of the bobbin holder fits
next to the stopper on the race.
next to the stopper on the race.
q
Knob
w
Stopper
c
Replace the bobbin.
Attach the needle plate, inserting the two
guide pins into the holes in the needle plate.
Tighten the screw firmly with the screwdriver.
Attach the needle plate, inserting the two
guide pins into the holes in the needle plate.
Tighten the screw firmly with the screwdriver.
e
Guide holes
r
Screw