Husqvarna C10 Manuel D’Utilisation

47

 : Select for sewing eyelets on belts , etc

1.  Select pattern 28 to get the eyelet stitch. 

Attach satin stitch foot (A).

2.  Press the “-“ or “+” stitch width adjustment 

to select the eyelet size.

 

Size of eyelet:

 

A. Large: 7.0mm (1/4 inch).

 

B. Medium: 6.0mm  (15/64 inch).

 

C. Small: 5.0mm  (3/16 inch).

3.  Lower the needle into the fabric at the 

beginning of the stitching, and then lower 
the presser foot lever. 

 

Once sewing is completed, the machine 
automatically sews reinforcement stitches, 
then stops.

4.  Make a hole at the center using an eyelet 

punch.

* 

Eyelet punch is not included with the   
machine.

Please Note: If thin thread is used, the 
stitching may not be dense enough. If 
this occurs, sew the eyelet twice one on 
top of the other.