ONKYO CR-N1 Manuel D’Utilisation
49
Using the timer (remote controller only)
You can configure days as weekdays, week-
end days, or both. Configuring days as both
allows you to turn the CR-N1 on and off
twice on such days.
end days, or both. Configuring days as both
allows you to turn the CR-N1 on and off
twice on such days.
Initially, Monday through Friday are config-
ured as weekdays, and Saturday and Sunday,
as weekend days, as shown.
ured as weekdays, and Saturday and Sunday,
as weekend days, as shown.
1
Press the TIMER button repeatedly to
select DAY SET, and then press the
ENTER button.
select DAY SET, and then press the
ENTER button.
2
Use the SETTING ( / ) buttons to select
WEEKDAY or WEEKEND, and then press
the ENTER button.
WEEKDAY or WEEKEND, and then press
the ENTER button.
The current configuration for the selected
timer appears.
timer appears.
3
Use the SETTING ( / ) buttons to turn
the first day on or off, and then press
the ENTER button to set that day and
move the cursor to the next position.
the first day on or off, and then press
the ENTER button to set that day and
move the cursor to the next position.
4
Repeat step 3 until all days have been
configured, and then press the ENTER
button.
configured, and then press the ENTER
button.
Configuring weekdays &
weekends
weekends
TIMER
ENTER
SETTING ( / )
SETTING ( / )
Sunday
Saturday
Monday
Tuesday
Wednesday
WEEKDAY:
Initial factory configuration
WEEKEND:
Thursday
Friday
or