ONKYO DX-7355 Manuel D’Utilisation

18

For MP3 CDs, tracks (MP3 files) may be organized in a 
hierarchically, with groups (folders) containing tracks 
and subgroups, as shown below.

• In this manual, MP3 files are referred to as tracks.
• Likewise, folders (directories) are referred to as 

groups.

If you don’t select a specific MP3 track or group for 
playback, all of the MP3 tracks on the CD will be played 
in numerical order starting with track #1 in parentheses.

For the DX-7355, there are two modes for selecting 
tracks (MP3 files): Navigation mode and All Group 
mode.

In Navigation mode, you can select tracks (MP3 files) by 
navigating through the group (folder) hierarchy, moving 
in and out of groups (folders) and subgroups (subfold-
ers).

In All Group mode, all groups (folders) appear at the 
same level, making it easy to select groups (folders) 
regardless of the hierarchy.

While playback is stopped, press the [ ] button to enter 
the Navigation mode or the [ ] button to enter the All 
Group mode.

When operating directly the DX-7355, press the Stop 
[ ] button to enter the Navigation mode or hold down 
the Stop [ ] button for about 2 seconds to enter the All 
Group mode.
The combination between the way to press the button 
and the corresponding playback mode can be 
exchanged. When operating on DX-7355, the track 
selection in the Navigation and All Group modes can be 
disabled. (See “STOP KEY” of “Setting MP3 Prefer-
ences” on page 25.)

In Navigation mode, you can select tracks by navigating 
through the group hierarchy. This mode can only be used 
while playback is stopped.

If any of random playback, memory playback, or 
1-group playback mode is currently selected, press the 
[PLAY MODE] button to cancel the mode before pro-
ceeding.

Track #1
(Track #11)

Track #1
(Track #1)

Track #10
(Track #10)

Group #3

Track #2
(Track #12)

Root

Group #1

Group #2

Track #3
(Track #13)

Group #4

Track #1
(Track #14)

Track #5
(Track #18)

The DX-7355 enters Navigation mode 
and “ROOT” appears on the display.

The first group name in ROOT appears 
on the display.

If the disc contains no groups, the first 
track name is displayed.

• Groups that don’t contain tracks or 

subgroups can’t be selected.

• Repeat steps 2 and 3 to select the 

tracks and subgroups in that group.

• To move up a level, press the [ ] 

button.

• To cancel the procedure at any point, 

press the Stop [ ] button.

Playback will start with the specified 
track or group and continue until all of 
the tracks on the disc have been played.

, , ,