ONKYO DX-7355 Manuel D’Utilisation

Troubleshooting

—Continued

does not work.

• There’s no RCA/phono analog audio connection. To use

you must make an analog audio connection (RCA/phono)

between the DX-7355 and your Onkyo AV receiver, even if they are connected digitally.

Specifications

Signal readout:

Optical non-contact

Frequency response:

4 Hz–20 kHz

SN ratio:

106 dB

Audio dynamic range:

100 dB

THD (total harmonic distortion):

0.0029%

Audio output

Digital optical:

–22.5 dBm

Audio output/Impedance

Digital coaxial:

0.5 V (p-p), 75

Audio output/Impedance

Analog:

2.0 V (rms), 600

Power supply:

AC 120/220–240 V, 50/60 Hz
AC 220–230 V, 50/60 Hz

Power consumption:

Worldwide model: 15 W
Others: 14 W

Dimensions (W

u H u D):

435

u 81 u 315 mm

Weight:

4.4 kg

Operation condition

Temperature, humidity:

5–35 °C, 5–85% (no condensation)

Supported discs:

CD, CD-R, CD-RW, MP3
(Discs that have not been properly finalized may only be
partially playable or not playable at all.)

Specifications and features are subject to change without notice.

The DX-7355 contains a microcomputer for signal processing and control functions. In very rare
situations, severe interference, noise from an external source, or static electricity may cause it to
lockup. In the unlikely event that this should happen, unplug the power cord, wait at least 10
seconds, and then plug it again.

Onkyo is not responsible for damages (such as CD rental fees) due to unsuccessful recordings
caused by the unit’s malfunction. Before you record important data, make sure that the material
will be recorded correctly.