Sony CDX-GT45U Manuel D’Utilisation

18

*1 This feature is available on non-Argentine 

models.

*2 When the unit is turned off.

*3 When the audio output is set to “SUB-OUT” 

or Rear Bass Enhancer is set to other than 
“OFF.”

*4 When the audio output is set to “SUB-OUT.”

 (Black Out)

Turns off the illumination automatically 
for any source (e.g., during radio 
reception/CD playback, etc.) if no 
operation is performed for 5 seconds: 
“ON,” “OFF.”
To bring the light back on, press any 
button on the unit. (When activated, 
remote operation is unavailable.)

 (Demonstration)

Activates the demonstration: “ON,” 
“OFF.”

Changes the display brightness: “ON,” 
“OFF.”

 (Motion Display)

– “SA”: to show moving patterns and 

spectrum analyzer.

– “OFF”: to deactivate the Motion Display.

 (Auto Scroll)

Scrolls long items automatically: “ON,” 
“OFF.”

 (Zappin Time)

Selects the playback time for the 
ZAPPIN function.

– “Z.TIME-1 (about 6 seconds),” 

“Z.TIME-2 (about 15 seconds),” 
“Z.TIME-3 (about 30 seconds).”

 (Zappin Beep)

Has the beep sound between track 
passages: “ON,” “OFF.”

*

3

 (Low Pass Filter Frequency)

Selects the subwoofer cut-off frequency: 
“50Hz,” “60Hz,” “80Hz,” “100Hz,” 
“120Hz.”

*

3

 (Low Pass Filter Slope)

Selects the LPF slope: “1,” “2,” “3.”

*

4

(Subwoofer Phase)

Selects the subwoofer phase: “NORM,” 
“REV.”

 (High Pass Filter Frequency)

Selects the front/rear speaker cut-off 
frequency: “OFF,”“50Hz,” “60Hz,” 
“80Hz,” “100Hz,” “120Hz.”

 (High Pass Filter Slope)

Selects the HPF slope (effective only when 
HPF FREQ is set to other than “OFF”): “1,” 
“2,” “3.”

 (Dynamic Loudness)

Reinforces bass and treble for clear 
sound at low volume levels: “ON,” 
“OFF.”

 (Automatic Level Optimizer)

Adjust the playback volume level of all 
playback sources to the optimum level: 
“ON,” “OFF.”