Sony CDX-F5550EE Manuel D’Utilisation
9
Receiving a station through a
list — list-up
list — list-up
You can list up the frequency or the name. For
details on labelling a station, see page 10.
details on labelling a station, see page 10.
1
Select the band, then press (LIST).
The frequency or station name appears.
The frequency or station name appears.
2
Press (LIST) repeatedly until the
desired station appears.
desired station appears.
After 5 seconds, the unit returns to normal
reception mode.
reception mode.
3
Press (SEEK) –/+ to receive the
station.
station.
With the card remote commander
In step 2, to select the station, press
In step 2, to select the station, press
M or m.
Other functions
Changing the sound
settings
settings
Adjusting the sound
characteristics — BAL/FAD/SUB
characteristics — BAL/FAD/SUB
You can adjust the balance, fader, and subwoofer
volume.
volume.
1
Press the select button repeatedly
until “BAL,” “FAD” or “SUB” appears.
The item changes as follows:
until “BAL,” “FAD” or “SUB” appears.
The item changes as follows:
LOW*
1
t MID*
1
t HI*
1
t
BAL (left-right)
t FAD (front-rear) t
SUB (subwoofer volume)*
2
*1 When EQ3 is activated (page 9).
*2 When the audio output is set to “SUB”
*2 When the audio output is set to “SUB”
2
Rotate the volume control dial
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
repeatedly to adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Note
Adjust within 3 seconds of selecting the item.
Adjust within 3 seconds of selecting the item.
With the card remote commander
In step 2, to adjust the selected item, press
In step 2, to adjust the selected item, press
<, M, ,
or
m.
Adjusting the equalizer curve
— EQ3
— EQ3
You can adjust and store the equalizer settings
for different tone ranges.
for different tone ranges.
1
Select a source, then press (EQ3)
repeatedly to select the EQ3 type.
repeatedly to select the EQ3 type.
2
Press the select button repeatedly
until “LOW,” “MID” or “HI” appears.
until “LOW,” “MID” or “HI” appears.
3
Rotate the volume control dial
repeatedly to adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
repeatedly to adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
curve.
continue to next page
t