GN Netcom GN9010-BT Manuel D’Utilisation
Checking the System
5
If your telephone has volume control, set the
volume in the middle position.
volume in the middle position.
6
Press the headset/handset
selector to switch on the
headset. The headset mode
indicator on the base station
illuminates.
selector to switch on the
headset. The headset mode
indicator on the base station
illuminates.
7
The headset
mode indicator
on the headset
begins flashing
within 10
seconds. If the
headset mode
indicator does
not flash, recheck
assembly.
mode indicator
on the headset
begins flashing
within 10
seconds. If the
headset mode
indicator does
not flash, recheck
assembly.
8
The system is now working.
9
If the lights are still off, the headset/handset selector
is in handset position. Press the headset/handset
selector once.
is in handset position. Press the headset/handset
selector once.
Adjusting to your Telephone
10
Put on the headset.
11
Make sure the mute
function is off. If
you hear a beep
every 3 seconds, the
mute function is on.
Turn off the mute
function by pressing
the mute button
once.
function is off. If
you hear a beep
every 3 seconds, the
mute function is on.
Turn off the mute
function by pressing
the mute button
once.
12
Lift the handset
from your telephone
and listen for a dial
tone in your headset.
from your telephone
and listen for a dial
tone in your headset.
13
If there is no dial
tone, adjust the tele-
phone compatibility
setting until the dial
tone is clear. If dial
tone is clear for both
A and G, set to A.
tone, adjust the tele-
phone compatibility
setting until the dial
tone is clear. If dial
tone is clear for both
A and G, set to A.
¥ 1
¥ 2
¥ 3
¥ 4
¥ 3
¥ 4
¥ 5
¥ 6
¥ 7
¥ 6
¥ 7
¥ 8
¥ A
¥ B
¥ C
¥ D
¥ C
¥ D
¥ E
¥ F
¥ G
¥ F
¥ G