Philips KEY0079 Manuel D’Utilisation
Power supply
10
This camera is powered by a built-in USB
rechargeable lithium battery which you can
charge direct from your computer.
rechargeable lithium battery which you can
charge direct from your computer.
TIP:
–
When you use the camera for the very first time,
you’ll need to charge the battery before taking
pictures.
you’ll need to charge the battery before taking
pictures.
USB rechargeable battery
1 Check the camera is in the power off
position. Detach the USB cover.
2 Turn on your computer.
3 Connect the camera’s USB port to the USB
3 Connect the camera’s USB port to the USB
port of your computer.
➜ You will hear a double beep. Charging
➜ You will hear a double beep. Charging
starts immediately. While charging the
POWER (green) indicator blinks.
POWER (green) indicator blinks.
➜ Make sure you leave your PC switched
on during charging. After approx. 3
hours, the battery is fully charged,
hours, the battery is fully charged,
4 Disconnect the camera and replace the USB
cover.
TIP:
–
When you detach the USB cover, keep it in a safe place.
–
To avoid damaging the USB port, always replace the USB cover when not connecting to
your computer.
your computer.
–
During USB connection/ battery charging, by default taking pictures is not possible.
–
For Mac users: When connecting the camera to your computer, avoid using the USB
connection on your Mac keyboard as it doesn't have sufficient power to detect your
camera.
connection on your Mac keyboard as it doesn't have sufficient power to detect your
camera.