Roland CD-2i Manuel D’Utilisation
Recording Karaoke
(continued)
59
Advanced Uses
Recording
Listening
Deleting
Creating a CD
Editing an SD
Appendices
Convenient
Functions
Information
/
Display
Checkin
g
/
Preparations
6
Prepare your karaoke CD.
Insert the karaoke CD (
☞
Press the [CD] button so it’s lit, and set the audio source to “CD.”
Use the [
] [
] buttons to select the song that you want to record.
7
Adjust the CD’s playback level and the mic’s input level.
Adjust the levels to obtain the desired volume balance between the CD and the mic.
* If sound from the speakers enters the mic, you won’t be able to adjust the level correctly. While
adjusting the level, either turn the [VOLUME] knob all the way down or turn the speakers off, so
no sound will be produced. Use headphones if you want to monitor the sound that’s being
recorded.
no sound will be produced. Use headphones if you want to monitor the sound that’s being
recorded.
Press the [
](Play) button to play back the CD.
Press the [
] or [
] button to access the SD/CD Level setting screen.
Use the [+] [-] buttons to adjust the CD’s playback level (“SD/CD Level”).
fig.player-level.eps
Turn the [MIC] knob to adjust the input level of the external mics.
As a guideline, adjust the level so that the level meter’s “-3 dB” indicator lights briefly when
the CD audio and mic audio are heard together.
the CD audio and mic audio are heard together.
Adjust the loudness of the sound you’re recording. Since you’re not using the LINE/PHONO
input, turn the [LINE/PHONO] knob all the way to the left (off).
input, turn the [LINE/PHONO] knob all the way to the left (off).
When you’ve finished adjusting the level, press the [
](Stop) button to stop the CD
playback.
* When using the [MIC] knob or [LINE/PHONO] knob, you might hear a slight noise when the
recording level changes; this does not indicate a malfunction.
fig.overdub-CD01.eps
Value (units: dB)
Explanation
-6–0 (factory setting)–6
Decreasing this value will lower the playback level.
Increasing it will raise the playback level.
“0” is the CD’s original playback level.
Increasing it will raise the playback level.
“0” is the CD’s original playback level.
* If you don’t press the [+] [-] buttons for five seconds,
you’ll automatically be returned to the audio source
display.
display.
-3dB
Louder
Quieter
At this position
CD-2i_e.book 59 ページ ２０１０年３月１５日 月曜日 午前１０時１５分