Tascam CD-A550 Manuel D’Utilisation

TASCAM CD-A550/CD-A750

5 – Playing Back CDs

OPEN/CLOSE key

Instead of pressing the OPEN/CLOSE key to close the disc
tray, you can press the CD PLAY or READY key on the
main unit or the remote control to close the disc tray
and begin playback immediately.

CAUTION

If you open the disc tray while this unit is in use, the fol-
lowing settings are lost.
• Program
• CALL point
• Resume point
• Current folder (for data CDs)

Tray lock function

Turn the tray lock function ON to disable the

OPEN/CLOSE

keys during playback and when playback is paused so that
the disc tray is not opened unintentionally. This allows you
to prevent accidentally interrupting playback by pressing
the

OPEN/CLOSE

key. The default setting for the unit is

OFF. To turn the tray lock function ON, use the menu and
conduct the following procedures.

1 When in standard display mode, press the

key on the main unit or the remote control to enter
menu mode.

2 Use the –/+ keys on the main unit or the remote con-

trol to show “

TRAY LOCK?

” on the main display,

and press the

ENTER

key.

3 Use the –/+ key to change the setting from

OFF

(default value) to

4 Press the

ENTER

key to return to the standard dis-

play.

CD playback

The following explanation assumes that the necessary
connections have been made, the unit’s power is ON and a
CD (audio CD or data CD) has been loaded.

To start CD playback, press the

CD PLAY

key on the main

unit or the remote control.

A CD and a cassette tape can be played at the same
time.

CD-PLAY key

CD PLAY key

• Stopping playback

Press the

CD STOP

key on the main unit or the

remote control.

• Pausing Playback

Press the

READY

key on the main unit or the remote

control.

In this Owner’s Manual, explanations assume that the CD
playback mode is set to CONTINUE (continuous playback
mode) unless otherwise specified.